Technical information

Front Panel Control

• Zoom: Telephoto & Wide

• AutoFocus & Manual Focus

• Note that these buttons are active only when the MAIN input is selected.

Zoom: Telephoto & Wide

• These two buttons are probably the most important and most fre-

quently used controls on the Communicator’s panel.

• Telephoto brings the object being displayed closer. As the camera

zooms in, some repositioning of the object will be required so that

the desired area of interest is displayed.

• Wide adjusts the lens so that more of the object is displayed. This is

sometimes referred to as “zooming out.”

• Any button can either be held down for quick operation or tapped re-

peatedly for more accurate control.

• Note that while using either zoom feature, the focus of the image

may become blurred. This is normal. When the desired zoom level is

reached, press the Autofocus button.

AutoFocus

• A single press of this button will automatically bring the document or

object being displayed into sharp focus.

• An unusual three-dimensional object may not focus properly on

every detail when a close zoom is used. Use the near & far buttons

to focus on the desired area.

• The menu button should be used only by court staff. This feature fa-

cilitates technical setup of the Communicator.

DOAR Communicator