Brochure

www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572
5
DoALL Model Number DS-280SA S-280CNC DS-400CNC DS-500SA
Warranty Parts/Service Parts/Service Parts/Service Parts/Service
Warranty Length 2-year standard 2-year standard 2-year standard 2-year standard
Capacity Rectangle at 90° HxW 7 x 11" (180x280mm) 9 x 11" (220x280mm) 14 x 16" (350x400mm) 14 x 20" (360x500mm)
Capacity Round at 90° 9" (230mm) 9.5" (240mm) 15" (380mm) 15" (380mm)
Round Solid Capacity at 90° 5-7/8" (150mm) 5-7/8" (150mm) 9-7/8" (250mm) 9-7/8" (250mm)
Rectangle Capacity at 45° 7.1 x 6.7" (180x170mm) 7.5 x 6.7" (190x170mm) 13 x 4.7" (330x120mm) 15.75 x 7.5" (400x190mm)
Round Capacity at 45° 7.5" (190mm) 7.5" (190mm) 7.1" (180mm) 14.2" (360mm)
Rectangle Capacity at 60° 4.7 x 4.3" (120x110mm) 4.7 x 5.9" (120x150mm) N/A 10.6 x 12.6" (270x320mm)
Round Capacity at 60° 4.7" (120mm) 4.7" (120mm) N/A 12.2" (310mm)
Blade Drive Motor 2 hp (1.5kW) 3 hp (2.23kW) 4 hp (3kW) 4 hp (3kW)
Blade Speeds 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm)
Maximum Blade Length 107" (2720mm) 117" (2980mm) 178" (4520mm) 188" (4780mm)
Blade Widths & Gage 1 x 0.035" (27x0.9mm) 1 x 0.035" (27x0.9mm) 1-1/4 x 0.042" (34x1.1mm) 1-1/4 x 0.042" (34x1.1mm)
HMI Controller Mitsubishi Saw Micro - Czech Saw Micro - Czech Mitsubishi
Standard Indexer N/A N/A 1.6'  (0.49m) N/A
More informaon at doallsaws.com/ds-280sa doallsaws.com/ds-280cnc doallsaws.com/ds-400cnc doallsaws.com/ds-500sa
Material Pass Line Height 31-1/3" (795mm) and 37" (940mm) 37" (940mm) 37" (940mm) 32-1/3" (820mm)
Floor Space Required 74 x 42 x 77" (1860x1045x1950mm) 85 x 87 x 75" (2150x2200x1900mm) 91 x 108 x 99" (2300x2750x2500mm) 109 x 38 x 90" (2750x950x2270mm)
Weight 871 lbs (395kg) 1764 lbs (800kg) 2921 lbs (1325kg) 1576 lbs (715kg)
Miter Cung/Head Tilt on a Tilt
Frame
60 degrees Right and 45 degrees Le 60 degrees Right in Semi-auto mode
only
45 degrees Le and Right in Semi-auto
mode only
60 degrees Le and Right
Blade Guides Bimetal or Carbide Hardmetal Hardmetal Cast iron
Feed System Semi-Automac Hydraulic Hydraulic Control Hydraulic Control Semi-Automac Hydraulic
Hydraulic Pump 1/2 hp (0.37kW) 1.14 hp (0.85kW) 1.14 hp (0.85kW) 0.07 hp (0.05kW)
Coolant Pump 0.07 hp (0.05kW) 0.12 hp (0.09kW) 0.07 hp (0.05kW) 0.6 hp (0.44kW)
Coolant Tank Capacity 2-3/8 gal (10 lit) 2-3/8 gal (10 lit) 5-1/4 gal (20 lit) 5-1/4 gal (20 lit)
Auto Index Single Stroke Min-Max N/A 0.12-19.7" (3-500mm) 0.12-19.3" (3-490mm) N/A
Auto Index Mulple Stroke Min-Max N/A 126" (3200mm) 126" (3200mm) N/A
Max Bundle Capacity at 90° 7 x 4.7" (180x120mm) 9 x 3.9" (230x100mm) 15.7" x 8.3" (400x210mm) 19.7" x 8.7" (500x220mm)
Min Bundle Capacity at 90° 0.20" (5mm) 0.20" (5mm) 0.20" (5mm) 0.20" (5mm)
Minimum Bu End N/A 7.5" (190mm) 11" (280mm) N/A
Vise Hydraulic Hydraulic Hydraulic Hydraulic
DoALL oers a variety of low cost, general purpose
producon metal-cung band saws. These saws are ideal
for small shops and maintenance facilies that have an
occasional need to cut structural material. A large variety of
oponal accessories are available to customize the machine
for specic sawing requirements.
DS-280CNC
DS-280SA
General Purpose Miter StructurALL Series
Features and Benefits:
• Wide range of blade speeds
• Over feed protecon
• High level of dampening with use of many key cast
components
• Li points of the machine are clearly indicated for ease of
movement and installaon
• Oponal right or le miter modular designed work
conveyors in 40" and 80" lengths
• Oponal power roller conveyor make moving heavy
material easy
DS-500SADS-400CNC
4