Brochure

www.DoALLsaws.com | 888.362.5572www.DoALLsaws.com | 888.362.5572
3
DCDS-600NC
DCDS-600SA
DoALL Model Number DCDS-600SA DCDS-600NC DCDS-750SA DCDS-750NC
Warranty Parts/Service Parts/Service Parts/Service Parts/Service
Warranty Length 2-year standard 2-year standard 2-year standard 2-year standard
Capacity Rectangle at 90° HxW 17.25 x 24" (440x610mm) 17.25 x 24" (440x610mm) 19 x 30" (480x750mm) 19 x 30" (480x750mm)
Capacity Round at 90° 18.5" (470mm) 18.5" (470mm) 20" (500mm) 20" (500mm)
Round Solid Capacity at 90° 9-7/8" (250mm) 9-7/8" (250mm) 15-3/4" (400mm) 15-3/4" (400mm)
Rectangle Capacity at 45° 19.5 x 16.3" (495x415mm) 19.5 x 16.3" (495x415mm) 19.7 x 18.9" (500x480mm) 19.7 x 18.9" (500x480mm)
Round Capacity at 45° 18.5" (470mm) 18.5" (470mm) 19.7" (500mm) 19.7" (500mm)
Rectangle Capacity at 60° 12 x 16.7" (305x425mm) 12 x 16.7" (305x425mm) 13 x 18.9" (330x480mm) 13 x 18.9" (330x480mm)
Round Capacity at 60° 13" (330mm) 13" (330mm) 13" (330mm) 13" (330mm)
Blade Drive Motor 5 hp (4kW) 5 hp (4kW) 5 hp (4kW) 5 hp (4kW)
Blade Speeds 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm) 65-328 fpm (20-100mpm)
Maximum Blade Length 238-1/2" (6060mm) 238-1/2" (6060mm) 256" (6500mm) 256" (6500mm)
Blade Widths & Gage 1-1/4 x 0.042" (34x1.1mm) 1-1/4 x 0.042" (34x1.1mm) 1-1/2" x 0.05" (41x1.3mm) 1-1/2" x 0.05" (41x1.3mm)
HMI Controller Mitsubishi Mahler Mitsubishi Mahler
Standard Indexer N/A 6.56  (2m) N/A 6.56  (2m)
More informaon at doallsaws.com/dcds-600sa doallsaws.com/dcds-600nc doallsaws.com/dcds-750sa doallsaws.com/dcds-750nc
Material Pass Line Height 31-1/2" (800mm) 31-1/2" (800mm) 32" (815mm) 32" (815mm)
Floor Space Required 138 x 69 x 87" (3500x1760x2200mm) 126 x 192 x 94" (3200x4880x2390mm) 142 x 67 x 95" (3600x1700x2400mm) 142 x 232 x 95" (3600x5880x2400mm)
Weight 3715 lbs (1685kg) 8455 lbs (3835kg) 4409 lbs (2000kg) 9149 lbs (4150kg)
Miter Cung/Head Tilt on a Tilt Frame 60 degrees Le and Right 60 degrees Le and Right 60 degrees Le and Right 60 degrees Le and Right
Blade Guides Bimetal or Carbide Bimetal or Carbide Bimetal or Carbide Bimetal or Carbide
Feed System Hydraulic Control Electromotor and gearbox Hydraulic Control Electromotor and gearbox
Hydraulic Pump 3.8 hp (2.84kW) 3.8 hp (2.84kW) 3 hp (2.2kW) 3 hp (2.2kW)
Hydraulic Tank Capacity N/A N/A 3.4 gal (13.0 L) 3.4 gal (13.0 L)
Coolant Pump 0.16 hp (0.12kW) 0.16 hp (0.12kW) 0.16 hp (0.12kW) 0.16 hp (0.12kW)
Coolant Tank Capacity 6-5/8 gal (25 lit) 6-5/8 gal (25 lit) 10-1/2 gal (40 lit) 10-1/2 gal (40 lit)
Auto Index Single Stroke Min-Max N/A 0.12-78.7" (3-2000mm) N/A 0.12-78.7" (3-2000mm)
Auto Index Mulple Stroke Min-Max N/A 394" (9999mm) N/A 394" (9999mm)
Max Bundle Capacity at 90° 24" x 10" (610x255mm) 24" x 10" (610x255mm) 29.5" x 10.2" (750x260mm) 29.5" x 10.2" (750x260mm)
Min Bundle Capacity at 90° 0.4" (10mm) 0.4" (10mm) 0.4" (10mm) 3.3" (85mm)
Minimum Bu End 1.2" (30mm) 5.5" (140mm) 1.2" (30mm) 4.7" (120mm)
Vise Hydraulic Hydraulic Hydraulic Hydraulic
DCDS-750NCDCDS-750SA
DoALL dual column, dual swivel are ideal for producon sawing
of a large variety of materials including, but not limited to,
structural solids, stainless and tool steel. Double column,
double miter saws are ideal machines for a fabricator cung
mulple angles in the same work piece.
Features and Benefits:
• True dual column design with high rigidity for outstanding cung performance and life
• Dual miter capability up to 60 degrees right and le
• Standard work area lighng
• Oponal right and le modular work conveyors
• Oponal power work conveyors
• Oponal li conveyors
• Oponal right and le work roll table to ease movement of material
Dual Column, Dual Swivel Miter StructurALL
®
Series
2