User Manual

23
DUST SPOUT
1. This option is located just below the worktable on
the right side of the machine frame near the lower
saw guide and attached to a collection system for
disposal of chips and other waste materials.
BANDWHEELS
1. Your machine may be equipped with anged metal
face or center crowned rubber tired bandwheels
instead of the standard rubber faced flanged
bandwheels.
EXTRA WORK HEIGHT
1. The factory installed extra work height allows
maximum cutting capacity up to 30 inches (762.0
mm). Machines with this option have an auxiliary
post support, plus a slightly different frame
weldment, post guarding, and post elevating
handwheel from those shown else where in this
manual.
18" (457.2 mm) STROKE WORKTABLE
1. This factory-installed hydraulic powered worktable
has a 18 inch (457.2 mm) stroke instead of standard
12 inch (304.8 mm) stroke. The table's working
surface is 26.5 by 39.5 inches (673.1 by 1000.3
mm).
DBW-15 BUTTWELDER
1. Information covering blade welding, plus operation
and maintenance of the optional DBW-15 Buttwelder
(with ash grinder and blade shear) are provided
in a seperate instruction manual included with the
machine.
BAND LUBRICATOR
1. See the instructions sent with the unit for information
on operation and adjustments.
OPTIONAL SAW GUIDE BLOCKS
1. It is possible to equip the machine with heavy-duty,
insert-type saw guides or roller saw guides.
Insert-Type Saw Guides
• High speed, heavy-duty saw guide blocks are for
band speeds up to 6000 fpm (1830 m/min).
High Speed Saw Guides (Standard)
• Saw guides with steel or carbide-faced back-up
bearings with saw band widths of 1/16 to one
(1) inch (1.6 to 25.4 mm) can be used with this
machine.
Heavy-Duty Saw Guides With Steel or Carbide-Faced Back-Up Bearing.
Roller Saw Guides
• Type II roller saw guide blocks use 1/4 to one (1)
inch (6.4 to 25.4 mm) saw bands and are for band
speeds up to 6000 fpm (1830 m/min).
Type II roller saw guide blocks reduce the work
height capacity by one (1) inch (25.4 mm) and
restricts right table tilt to 27°.