User Manual

14
LUBRICATION
LUBRICATION CHART
LOCATION DESCRIPTION AND
SERVICE RECOMMENDATIONS
RECOMMENDED
LUBRICANT
LUBRICATION
INTERVAL*
LUBRICATION
POINT NO.
Premium quality, multi-purpose lithium-
base, EP (extreme pressure) grease.
NLGI No. 2.
Union 76, UNOBA EP 2, or equivalent.
MONTHLY
Table Slide Rods. Two (2) grease ttings.
1
MONTHLY
MONTHLY
MONTHLY
CHECK
MONTHLY
MONTHLY
Post, Post Elevating and Gears. Clean and apply
oil.
Band Tension Screw and Bearing. Clean and apply oil.
Bandwheel Slides, Hinges, and Tilt Screws.
Clean and apply oil.
Table Trunnion. Oil tilt surfaces.
Transmission Shift Linkage and Interlock. Clean and
apply oil as required.
Miscellaneous: Slides, Hinges, Pivot Points,
Component Parts, Unpainted Surfaces, etc. Clean and
apply oil as required.
Accessory Equipment as Supplied. Keep clean and
apply oil as required to to maintain proper function, reduce
wear, and corrosion, etc.
MONTHLY
High quality, rust and oxidation-inhibited,
medium hydraulic and general purpose
industrial oil.
ISO-VG Grade 68 (Formerly ASTM Grade
No. 315).
Union 76, UNAX RX 68, or equivalent.
2
3
4
5
6
7
8
CHECK
MONTHLY
High quality, EP (extreme pressure) multi-
purpose gear oil.
S.A.E. Grade No. 90.
Union 76, MP Gear Lube 90 or equivalent.
CHECK
MONTHLY
Transmission. 1.7 pints (0.80 liter) capacity. Proper oil
level must be maintained. Drain and rell yearly or when
required.
9
10
Lubricate (if any) per manufacturer's recommendations.
Electric Motors. Oil cup and/or grease ttings.
Premium quality, saw band coolant and
lubricant.
DoALL cutting uids and/or oils (AL-2000).
Lubricate as required per DBW-15 Instruction Manual.
13
DBW-15 Buttwelder.
CHECK DAILY/
AS REQUIRED
Mist Coolant. Keep lled and hoses clear.
11
Multi-purpose automatic transmission uid.
Hydraulic Reservoir. 4.5 gallons (17.1 liters) capac-
ity. Keep reservoir full. Check oil level (dipstick) weekly.
Drain, clean strainer screen and rell after rst month;
every six (6) months thereafter. Change oil lters at same
intervals. Throughly clean reservoir once a year.
14
CHECK WEEKLY/
6 MONTHS
* Lubrication intervals are based on a 8-hour day, 40-hour week.
Lubricate more often with heavier use.
12
Contact your DoALL sales representative
for the best oils and/or uids for your
application.
DoALL cutting uids and/or oils.
CHECK DAILY/
AS REQUIRED
Band Mist Lubricator (Optional). Sixteen (16) ounces
(0.95 liter) capacity. Keep lled and hoses clear.