User Manual

12
LUBRICATION
LUBRICATION CHART
LOCATION DESCRIPTION AND
SERVICE RECOMMENDATIONS
RECOMMENDED
LUBRICANT
LUBRICATION
INTERVAL*
LUBRICATION
POINT NO.
1
Variable Pulley. One (1) oil cup.
CHECK
MONTHLY
High quality, EP (extreme pressure),miulti-
purpose gear oil.
S.A.E. Grade No. 90
Union 76, MP Gear Lube 90, or equivalent.
8
Premium quality, saw band coolant and
lubricant.
DoALL cutting uids and/or oils.
Lubricate (if any) per manufacturer's recommendations.
Micellaneous: Slides, Hinges, Pivot Points,
Component Parts, unpainted Surfaces, etc. Clean and
apply oil as required.
WEEKLY
High quality, rust and oxidation-inhibited,
medium hydraulic and general purpose
industrial oil.
ISO-VG Grade 68 (Formerly ASTM Grade
No. 315).
Union 76, UNAX RX 68, or equivalent.
* Lubrication intervals are based on a 8-hour day, 40-hour week.
Lubricate more often with heavier use.
2
Band Tension Screw and Bearing. Clean and apply oil.
MONTHLY
3
Post, Optional Post Elevating. Clean and apply oil.
MONTHLY
4
Bandwheel Slides, Hinge and Tilt Screws. Clean and
apply oil.
MONTHLY
5
Table Trunnion. Oil tilt surfaces.
MONTHLY
6
Speed Change Screw and Linkage. Clean and apply oil
as required.
CHECK
MONTHLY
9
Accessory Equipment When Supplied. Keep clean and
apply oil as required to maintain proper function, reduce
wear and corrosion, etc.
CHECK
MONTHLY
CHECK
MONTHLY
10
Transmission. One (1) quart (0.95 liter) capacity. Proper
oil level must be maintained. Drain and rell yearly or
when required.
11
Electric Motor. Band Drive.
13
Band Mist Lubricator(Optional). Keep reservoir lled
and hoses clear.
CHECK DAILY/
AS REQUIRED
12
Mist Coolant Reservoir (Optional). One (1) quart (0.95
liter) capacity. Keep lled and hoses clear.
MONTHLY
7
Transmission Shift Linkage and Interlock. Clean and
apply oil as required.
Lubricate as required per DBW-15 Instruction Manual.
14
DBW-15 Buttwelder (Optional).
Lubricate (if any) per manufacturer's recommendations.