User Manual

Do-All Traps Outdoors .22/.17 Bullet Box

Item Description Qty

1 Bottom Front Plate 1

2 Back Plate 1

3 Side Plates Rgiht & Left 2

4 Allen Screws 10

5 Allen Wrench 1

www.do-alloutdoors.com

6 Monster Clip 1

1-866-SHOT DOC

7 Hanging Rod 1

8 Target Bracket 1

Do-All Traps, LLC does not accept any responsibilty for damages and/or injury sustained from the use

or misuse of this product.

HARDWARE FRAME

ATTACH LEFT SIDE INSERT HANGING ROD

ATTACH RIGHT SIDE SECURE BACK PLATE

PAGE 1
Do-All Traps Outdoors .22/.17 Bullet Box Item Description 1 2 3 4 5 6 7 8 Bottom Front Plate Back Plate Side Plates Rgiht & Left Allen Screws Allen Wrench Monster Clip Hanging Rod Target Bracket Qty 1 1 2 10 1 1 1 1 www.do-alloutdoors.com 1-866-SHOT DOC Do-All Traps, LLC does not accept any responsibilty for damages and/or injury sustained from the use or misuse of this product.
PAGE 2
ATTACH TARGET BRACKET SET MONSTER CLIP BUILD BULLET BOX 1.THE LEFT SIDE PLATE ATTACHES TO THE BOTTOM FRONT PLATE BY SCREWING IN TWO ALLEN SCREWS. 2. ATTACH/INSERT THE HANGING ROD INTO THE TOP LEFT SIDE BEFORE SECURING THE RIGHT SIDE PLATE. 3. SECURE THE RIGHT SIDE PLATE WITH TWO ALLEN SCREWS. 4. SECURE THE BACK PLATE BY LINING UP THE THREADED TABS WITH SIX OUTSIDE HOLES AND TIGHTEN WITH SIX ALLEN SCREWS. 5.