Installation Manual

www.adamsrite.com
Phone: [phone]
800-872-3267
Fax: [phone]
800-232-7329
4580 CAM DISC HANDING
STEP 3
TURN THE CAM OVER AND PUSH
THE CAM PIVOT PIN THRU THE
CAM AND INTO THE CAM DISC
AS SHOWN.
LOOKING AT THE EDGE OF THE DOOR, DETERMINE ON WHICH
SIDE THE HANDLE OR OTHER OPERATOR IS TO BE INSTALLED.
THE CAM DISC MUST BE
HANDED AS SHOWN.
STEP 2
DO NOT REMOVE
THE DRIVER PIECE
PULL THE CAM PIVOT PIN OUT
OF THE CAM DISC AS SHOWN.
STEP 4
SNAP THE RETAINER CLIP
INTO THE GROOVE ON THE
CAM PIVOT PIN.
STEP 1
REMOVE THE
RETAINER CLIP
ON THIS SIDE
THE CAM DISC MUST BE
HANDED AS SHOWN.
ON THIS SIDE
INSTRUCTIONS FOR CHANGING HAND OF 4580 CAM DISC
Page 2 of 2
INSTALLATION INSTRUCTIONS
Rev.
Appvd: MP
Date: 06-19-12
ECN: 11955A
Date: 06-19-12
E
4591 PADDLE OPERATOR
80-0180-200