Technical information

- 9 -
English
lnstall/replace the batteries
 Before you install/replace the battery make sure that the MemoPen Data is in Stop-
Mode.
 To open the battery door, push the battery door and slide it into the arrow direction.
 Install two AAA (Micro) - batteries into the battery compartment. Pay attention to polar-
ity of the battey +/- and close the battery door.
Switch on
 Make sure that the HOLD-switch is in the OFF position and press one of the following
buttons REC/STOP, PLAY/STOP or FUNC/DISP to switch on the unit.
If you press the REC/STOP button for more than 3 sec. the
MemoPen Data starts to record a new message.
Starting operation