Technical information

- 37 -

English

Software installation

9. To ﬁ nish the installation, click Finish>.

10. The software installation is now completed. To register the programs at the registry,

you have to restart the PC. Click to OK.

11. After the restart of your PC, use the USB-Cable to connect the MemoPen Data with

your PC.

12. Found New Hardware appears now on the screen.

If the message doesn’t appear, there can be two reasons:

1. The USB-Port from the PC is disabled. This can be changed

in the BIOS-menu. The instructions, how to do it, is men-

tioned in the User Manual of your PC, if not, ask your PC

dealer.

2. You have connected the MemoPen Data with your PC

before you have installed the software. In this case you