Technical information

- 22 -

English

Playback

1. Make sure that the HOLD-switch is in the OFF position and press one of

the following buttons: REC/STOP, PLAY/STOP or FUNC/DISP to switch

on the unit.

2. Select the folder where the voice ﬁ le to be played is stored (ref. Special

functions Folder).

3. Press the PLAY/STOP button.

4. For approximately 2 seconds the display shows play, then the display

changes to playtime. The operating icon starts moving.

 In case no special voice ﬁ le is selected, the voice ﬁ le played last, will start again. The

display shows the number of the voice ﬁ le, the playtime and the operating icon starts.

 You can listen to the message either with the internal speaker or with the duo ear-

phone which is included as accessory.

 To stop the playing mode press the PLAY/STOP button again.

 The number of the last voice ﬁ le is shown on the display.

 If at stop-position no buttons are pressed within 1 minute, the recorder switches off

automatically.

Play speed control

To playback the voice ﬁ le you can select 3 different speeds. Normal, slow –30% or fast

+ 30%.

1. Start playback (ref. playback).

2. Press the PLAY/STOP -button until (approx. 1 sec.) the display shows NOR.

3. Use the / button (jog slide key) to select between FAST, SLOW and

NOR.

Playback