User manual

LIST OF ALL COMMANDS
(Some of these commands are not supported by TK102 and TK102-2.)
FUNCTION
COMMANDS
EXAMPLE
Password modification
password+old password+space+new password
password123456 666888
P.S:the password should be 6 digitals
Authorization
admin+password+space+cellphone number
admin123456 13311112222
P.S:there are 4 other numbers can set as the masters,use the same way to set them.
IP and Port Setting
adminip+password+space+IP address+space+port
adminip123456 192.167.1.1 8899
P.S:When you need the tracker has the way of GPRS transferring,this is the necessary setting.
APN setting
APN+password+space+the user's APN
APN123456 internet
P.S:When you need the tracker has the way of GPRS transferring,this is the necessary setting.And APN refers to the GSM card's APN.
APN user name setting
Apnuser+password+space+apn's username
apnuser123456 come
P.S:If the APN has user name,this is the command to setting this.
APN password setting
Apnpasswd+password+space+apn's password
apnpasswd123456 cmet
P.S:If the APN has password,this is the command to setting this.
Interval tracking
t030s005n+password
t030s005n123456
P.S:T=time,s=second,m=minutes,h=hour,n=times,t030s005n123456 means track 5 times for 30s interval,
"***" means countless times.And the minimum interval time is 5 seconds(new vesion tracker),30 seconds(old vesion),the maximum times is 250 times.
Tracking mode
tracker+password
tracker123456
P.S:If you need switch the other modes to tracking mode,you need send this commands.
Track once
tracking one / or call the tracker once
tracking one
P.S:If you want to have the tracker only report once,send tracking one to the tracker,or call the tracker once.
Listen in mode
monitor+password
monitor123456
P.S:If you need switch the other modes to listen in,you need send this commands. When you use the tracker first time,call the tracker,tracker reports you the
coordinates,send monitor123456,call the tracker you will hear what happen around the tracker.
Geofence
stockade+password+space+longitude,
latitude;longitude,latitude
stockade123456
22.567185,114.051248；22.555666，114.777888
P.S:Send this sms command to the tracker,then if the tracker run out the area you have set,it will send "stockade"with the location to you.
Movement Alert
move+password
move123456
P.S:The tracker will move 500m at least,or you cannot get this alert."move with the location"
Overspeed Alert
speed+password+space+080
speed123456 080
P.S:The unit of the speed is km which is the orignal data from the GPS,and if the speed less then 30km/h,you won't get the alert "speed+location"
Low battery Alert
no needing to set up
No needing to set up
P.S:When the back up battery is less than 3.7V,it will send " L".
Initialization
begin+password
begin123456
P.S"To cancel all the settings,you need this commands,but if you forget the password,you need update the firmare.
IMEI Checking
imei+password
imei123456
P.S:If you want to know the IMEI number of the tracker,you need this command.
SOS
no needing to set up
No need to set up
P.S:When someone press the SOS,you will get the information of 'help me with the coordinates".
Ignition alert
fortify+password
fortify123456
P.S:Only for the vehicle tracker,there are two wires connect the ACC(ignition),if you send "fortify123456",then anyone switch on the vehicle,it will send alert.
Ignition Status checking
fortified+password
fortified123456
P.S:If you want to make sure that the tracker in under this function,send this commands,and tracker will reply you.
Main power losing alert
no needing to set up
No need to set up
P.S:If the main power is losing,the tracker will send "battery".
Time zone setting
Time zone+password+space+GMT time
Time zone123456 2
P.S:"UK time is time zone123456 1"currently.
Individual Website setting
Home+pasword+space+the user's webite
home123456 www.tracker.com
P.S:If "tracker" wants make the returned sms has their domain name,they can set "home123456 www.tracker.com".
Relay on/off (stop engine)
Powercar+password+space+1 (or 0)
Powercar123456 1
P.S:Only the vehicle tracker has this function,"powercar123456 1/0" 1=on,0=off
Shake Alert(with the motion
sensor)
shake+password+space 1-10
shake1234656 1
P.S:Only the new version tracker has this function,from 0-10,means from shake heavily to softly,1 means the heaviest,10 means the softest.0=off
Read SD card
Readsd+password+space+1
readsd123456 1
P.S:Only the new version tracker has this function,where there is not GPRS connection,tracker records the information into the SD card and when there comes
the GPRS connection,tracker sends all the information to the server.1=on,0=off.
SMS report
smslinkone+password
smslinkone123456
Send report in SMS (it’s working during the gprs communication too…)
Restart tracker
restart+password
restart123456
P.S:This command is restart the tracker.