User guide

DNP IMS America, Corp. 27
Touring the Color Tab Hot Folder Print User Guide
Touring the Color Tab
Make universal changes to the color settings to the application from the color tab. Any changes you make are applied to all
prints until you either revert the changes or make other changes.
Figure 16. Color tab
 Use ICM: Selects whether you use the ICM specified on the ICM tab.
 Use Auto Color Correction: Applies automatic color correction to all images. Can be turned ON or OFF.
 Color Setting Drop-Down Menu: Select between changing the RGB, Gamma, Brightness, or Contrast values.
 Sync Channels: Causes changes to be applied across all three color channels simultaneously.
 Color Sliders: Changes the red, green, or blue channel settings.
 Saturation Slider: Changes the saturation values for all images.
 Sharp Slider: Can increase or decrease sharpness in all images.
Making Changes to the Color Tab
1. When needed, make any configuration changes to the color tab.
2. To save your changes, press the Save button in the lower right corner.
3. If you want to revert, or undo all of your changes, press the Undo Changes button. This reverts the changes to the
default settings when your software was installed.
4. Press the Back button to return to the dashboard.