User guide

26 DNP IMS America, Corp.
Touring the Settings Tab Hot Folder Print User Guide
Touring the Settings Tab
The options on the settings tab allow the application to be configured for your needs.
 Prints: Set the quantity of prints that are printed for each image. For example, if you want to offer double prints, you
set the quantity to 2.
Note
If you are using a duplex printer, only one copy is printed regardless of the print setting on the
Settings tab.
 Finish Type: Change between matte and glossy finish types for the print session.
 Resolution: Switch between the standard 300x300 dpi resolution or the higher 300x600 resolution
 Start Minimized: Starts the application minimized in the task bar.
 Archive Images: Automatically saves a copy of the image to the archive folder.
 Drag and Drop: Activates drag and drop print mode.
Attention
If drag and drop mode is activated, or ON, then images are automatically archived after printing.
 Minimum Prints Remaining - Error: Sets the threshold for when the printer status bar turns red to indicate an out of
media state.
 Minimum Prints Remaining - Warning: Sets the threshold for when the printer status bar turns yellow to indicate a
nearly out of media state.
Making Changes to the Settings Tab
1. When needed, make any configuration changes to the settings tab.
2. To save your changes, press the Save button in the lower right corner.
3. Press the Back button to return to the dashboard.