Operating instructions

33
Adjusting Print Settings
Chapter 5 Maintenance
pressing W for CYN-RED weakens red, while cyan, its
complementary color, is strengthened.
Brightness adjustment
DARK
Adjusts the scale of the dark tones. Pressing X makes dark
tones darker, while pressing W makes them lighter.
LIGHT
Adjusts the scale of light tones. Pressing X makes light
tones lighter, while pressing W makes them darker.
You can adjust contrast by adjusting DARK and LIGHT
simultaneously. Adjusting both in the + direction using X
strengthens contrast, while adjusting both in the – direction
using W weakens it.
SHARPNESS
Adjusts the sharpness of image outlines. Pressing X makes
outlines in images sharper, while pressing W makes them
softer.
GAMMA
Adjusts the scale of medium tones. Pressing X makes
medium tones darker, while pressing W makes them
lighter.
Adjusting the Print Position
When using the UPC-X46 print pack, you can adjust the
position in which images are printed in 0.5-mm increments
to ensure proper positioning on the print paper (in relation
to the perforation).
1 Press the MENU button.
2 Press S or T on the control button to display [PRINT
SETTINGS] on the LCD display.
3 Press X.
[PRINT OFFSET] appears.
4 Press W or X to specify the offset value.
5 Press the EXEC button.
Make a test printout, and check that the image is printed in
the correct location on the paper. If further adjustment is
needed, repeat the above steps.
Strong
Output
Weak StrongInput
Light
Output
Dark LightInput
Light
Output
Dark LightInput
Memo
Light
Output
Dark LightInput