Operating instructions

29
Reprinting the Photo Printed Last (Copy Print) / Printing from Computers
Chapter 4 Operation
Reprinting the Photo
Printed Last (Copy Print)
The data for the last photo that was printed is stored on the
unit’s internal memory. This photo can be reprinted.
1 Press the MENU button.
2 Press T on the control button to display [COPY
PRINT] on the LCD display.
3 Press X.
4 Press S or T to specify the number of copies you
want to print.
5 Press the EXEC button.
Printing begins.
• When you set the unit to standby mode, the internal
memory is cleared and copy print will not be possible.
• Photos will not be stored properly to the internal memory
if an interruption occurs during wireless image transfer
or if a storage media is removed while printing from the
storage media. Copy print will not be possible in such
cases.
• If you change the print paper size, the internal memory
data and the paper size will no longer match and copy
print will not be possible.
• Quality adjustment and trimming cannot be performed
for copy prints.
Printing from Computers
When the unit is connected to a computer via a
commercially available USB cable, data sent from the
computer can be printed on the unit.
When printing from a computer, you cannot specify ID
photo layouts for prints.
Installing the Printer Driver
To control the unit from a computer, you must install the
supplied printer driver on the computer before connecting
the unit to the computer.
For details on installation, refer to the installation guide
and Readme file on the supplied CD-ROM.
The supplied printer driver does not support printing via a
network.
Connecting to a Computer
To print from a computer, connect the unit to the computer
via a USB cable. Connect the USB cable to the USB port
(device) on the front panel of the unit.
For more details on connection, refer to the operating
instructions for your computer.
Notes
Note
Note
USB Memory
USB cable
Computer