Operating instructions

22
Using Expansion SD Cards
Chapter 3 Settings
Formatting Wireless LAN SD Cards
Wireless LAN SD cards that have been formatted on a
camera or computer may not operate properly on this unit.
In such cases, use the SD Formatter software provided by
the SD Association to reformat the cards.
You can download SD Formatter from the following Web
site.
https://www.sdcard.org/home/
We recommend the following for the SD Formatter option
setting.
FORMAT TYPE: QUICK
FORMAT SIZE ADJUSTMENT: OFF
After formatting is finished, configure settings for the
wireless LAN SD cards.
Using Expansion SD
Cards
An SD card (expansion SD card) for storing essential data
and settings is required to use the following functions:
• Adding layouts
• Printing logos
Use a commercially available SD card to create an
expansion SD card. We recommend using an SD card with
a storage capacity of 512 MB or higher.
If you are using wireless LAN SD cards to print, you can
store data and settings on the wireless LAN SD card and
use it as an expansion SD card.
SDXC cards are not supported.
Directory Structure for Expansion
SD Cards
Templates for ID photo layouts and logo images, and other
data are stored on an expansion SD card.
The directory structure for the expansion SD card is as
follows.
Creating Expansion SD Cards
When you create additional layouts and logos using the
utility software found on the supplied CD-ROM and save
them to an SD card, the above folder directory is
automatically created on the SD card.
When manually copying layouts and logos, be sure to use
the above directory structure.
Insert the created expansion SD card in the SD card slot on
the front of the unit.
Adding Layouts
In addition to the layouts preinstalled on the unit, you can
create and use original layouts.
Note
DNP DSID400
IDPhoto Layouts for ID photo printing
Template Logo images