Operating instructions

16
Startup and Shutdown
Chapter 2 Preparation
Startup and Shutdown
Startup
1 Press and hold the on/standby button for at least 1
second to turn on the unit.
The unit starts up, and [READY] appears on the LCD
display.
If there is no print cartridge or print paper loaded, the status
indicator lights orange and an error message appears on the
LCD display.
Shutdown
1 Finish any operations in progress.
2 Press the on/standby button to set the unit to standby
mode.
Wait at least 5 seconds before pressing the on/standby
button to turn the unit on again after turning it off.
Note