Operating instructions

Loading Print Packs

Chapter 2 Preparation

Loading Print Packs

Loading the print cartridge

Press the PUSH OPEN area at the top of the cartridge

compartment cover to open it.

Insert the print cartridge until it clicks into place.

If the print cartridge does not click into place, remove

it and re-insert it. If the cartridge cannot be loaded due

to ink ribbon slack, wind the spool in the direction of

the arrow while pressing it to remove the slack.

Close the cartridge compartment cover.

Inserting the print paper

Set the print paper inside the paper tray.

Insert the print paper with the protective sheet facing

up and the arrow on the protective sheet pointing in the

same direction as the arrow on the tray. You can load

25 sheets when using the UPC-X46 print pack, and 30

sheets when using the UPC-X34 print pack.

Handle the print paper carefully as it can easily

become disjointed.

Remove the protective sheet on top of the print paper

stack.

Be sure to keep the protective sheet, as it is used for

cleaning the inside of the printer.

Note

Cartridge compartment cover

Print cartridge

Note