Operating instructions

12
Installation / Loading Print Packs
Chapter 2 Preparation
Installation
Connecting the Power Cord
1 Attach the ferrite core to the end of the power cord (not
supplied) that connects to the unit.
Position the ferrite core about 3 cm (1
3
/
16
inch) away
power cord’s connector, and wrap the power cord once
around the ferrite core.
2 Connect the printer end of the power cord to the AC IN
connector on the unit, and connect the other end of the
cord to a power outlet.
Always use a power cord of the specified type.
Loading Print Packs
Handling Print Packs
• A print pack contains a print cartridge and print paper.
Be sure to use the print cartridge and print paper
packaged in the same carton as a set.
• Always use a print cartridge that matches the size of the
print paper you want to use. Using an unmatched
combination will not only prevent you from obtaining
proper print results, but may also cause paper jams and
malfunctions.
• Do not touch the printing surface of the print paper or the
ink ribbon of the print cartridge. Fingerprints or dust on
the printing surface or ink ribbon may result in lower
printing quality.
• The number of sheets that can be printed depends on the
print pack type. The following lists the numbers of
sheets that can be printed with a single set of ink ribbon
and paper.
• Do not write or type on the print paper before printing.
You may not be able to print if you do so. If you want to
write on the printed surface after printing, use an oil-
based pen. Word processor text cannot be printed on
printed images.
• Do not attach stamps or stickers on the printing paper
before printing.
• Do not print on used print paper. Printing an image twice
on the same paper will not make the printed image
darker, but may instead cause malfunctions.
• Do not fold or bend the print paper before printing.
Doing so may cause malfunctions.
Notes on storage
• Avoid storage in locations subject to:
– high temperatures
– high humidity or dust
– direct sunlight
• After opening the package, use the print pack as soon as
possible.
• When storing after partial use, store the print pack in its
original packaging.
Note
Ferrite core
(supplied)
3 cm
(1
3
/
16
")
Power cord (not supplied)
to power outlet
Notes
Print pack UPC-X34 series UPC-X46 series
Number of
sheets
30 25
Print size 70 × 95 mm ± 2 mm
(2
7
/
8
×3
3
/
4
inches
±
3
/
32
inches)
102 × 152 mm
±2mm (4
1
/
8
× 6
inches ±
3
/
32
inches)