Instruction manual

22
Software Licensing Agreement
Before using the software contained in the CD-ROM
supplied, please read through the “Software Licensing
Agreement” at the end of this manual.
You will not be allowed to use this software unless you
have agreed to accept the terms stated in the agreement.
Operation Environment
System requirements of attached software is described
to the install manual include attached CD-ROM.
When installing the software, log-on
shall be done by a qualified user(Administrators Group).
CAUTION
About software
The following softwares are required in order to use CX-
320. These are kept in the attached CD-ROM.
(1)
CX-330 Printer Driver
Install the printer driver from the attached CD-ROM
when using CX-330 printer drivers. Refer to the electronic
file in the CD-ROM “Printer Driver Install Manual” for
method to install. Refer to the respective guide books
on the use of other printer drivers.
(2)
CX-330 Status Monitor
Software that carries out various settings and indicates
the status of CX-330. Install into the host computer
that connects to CX-330.
Installation of Software
Refer to the electronic file “Printer Driver Install Manual”
(Installation PRD09∗.PDF) stored in the folder “English/
Document” ,and install the printer driver.
Do not power on the printer until the message “Power
on the printer” appears on the screen.
CAUTION
Connecting Multiple Printers
When connecting a host computer to multiple printers,
set different Unit Numbers from 1 to 7 for each printer.
Refer to see the page 37of the instruction manual.
To connect multiple printers to a network, you must
configure the IP addresses for a every printer, For details,
see page 38 of this documentation.
The Copyright of the Software is displayed
This product includes software developed by the Open SSL
Project for use in the Open SSL Toolkit.(http://
www.openssl.org/)
This product includes cryptographic software written by Eric
Young([e-mail]).
This product includes software written by Tim
Hudson([e-mail]).
Set-up (continued)