Operating instructions

22
Using Expansion SD Cards
Chapter 3 Settings
Using Expansion SD
Cards
An SD card (expansion SD card) for storing essential data
and settings is required to use the following functions:
• Adding layouts
• Printing logos
Use a commercially available SD card to create an
expansion SD card. We recommend using an SD card with
a storage capacity of 512 MB or higher.
If you are using wireless LAN SD cards to print, you can
store data and settings on the wireless LAN SD card and
use it as an expansion SD card.
SDXC cards are not supported.
Directory Structure for Expansion
SD Cards
Templates for ID photo layouts and logo images, and other
data are stored on an expansion SD card.
The directory structure for the expansion SD card is as
follows.
Creating Expansion SD Cards
When you create additional layouts and logos using the
utility software found on the supplied CD-ROM and save
them to an SD card, the above folder directory is
automatically created on the SD card.
When manually copying layouts and logos, be sure to use
the above directory structure.
Insert the created expansion SD card in the SD card slot on
the front of the unit.
Adding Layouts
In addition to the layouts preinstalled on the unit, you can
create and use original layouts.
For details on the layouts preinstalled on the unit, see
“Layout List” on page 38.
Creating original layouts
You can create layouts using the supplied DS ID Photo
Utility. For details, refer to the Setting Guide and Readme
file for the DS ID Photo Utility stored on the supplied
CD-ROM.
Saving layouts
Save created layouts to the “\DNP\DSID400\IDPhoto”
folder on the expansion SD card.
Selecting added layouts for printing
For details on selecting layouts, see “Selecting the
Layout” on page 18.
Adding Logos
You can include logos in printouts by creating original
logo images and saving them to an expansion SD card.
Creating logo images
Use commercially available image processing software to
create logo images. You must convert the created images
to a format supported by the unit.
For the details on how to create logo images, refer to the
Setting Guide and Readme file for the DS ID Photo Utility
stored on the supplied CD-ROM.
Saving logo images
Save created logo images to the
“\DNP\DSID400\Template” folder on the expansion SD
card.
Printing logos
Before printing, select the logo data stored on the
expansion SD card.
1 Press the MENU button.
2 Press T on the control button to display [PRINT
SETTINGS] on the LCD display.
3 Press X.
[PRINT OFFSET] appears.
Note
DNP DSID400
IDPhoto Layouts for ID photo printing
Template Logo images
Memo