User Manual

DMXking.com • JPK Systems Limited • New Zealand
0106-700-1.1
6
NETWORK TAB
Before starting eDMX Configuration utility please ensure your computer has a static IPv4 network setting, for example IP
192.168.0.100 Subnet 255.255.255.0 Gateway 192.168.0.254.
Upon startup eDMX devices are automatically detected and displayed by IP address. You can re-poll for new devices or just check
the communications is okay by clicking “Search For Devices”.
Click on the desired device’s IP address in the list and all Settings will be retrieved. Note that if no response is received the settings
will be greyed out. An activity box shows both transmitted and received messages to help with diagnosing communication issues.
If your network configuration has multiple adapters and or multi-homing you need to select the same network range as the eDMX
from the Network Adapter IP Address dropdown box and also ensure the subnet mask is appropriate.
Make changes to the applicable settings on the Network tab then click “Update Network Settings”.
Selecting “Firmware Update” will prompt for an appropriate firmware file and upload upon confirmation. A built in boot loader
permits updating of the LeDMX4 PRO firmware. Note only signed encrypted firmware files from DMXking.com can be successfully
loaded to ensure you won’t brick your device by accident. Future firmware releases for this product will be in the form 0106-500-
VersionMajor.VersionMinor.enc