User Manual

DMXking.com • JPK Systems Limited • New Zealand

0106-700-1.1

3. DEFAULT CONFIGURATION

LeDMX4 PRO units ship with default IP address settings. Please reconfigure for your local area network requirements before use.

Default configuration is for WS2811/2812 pixel output with automatic RGB color order correction and 1 DMX universe per output.

Network Tab

Parameter

Default Setting

IP Address

192.168.0.113

Subnet Mask

255.255.255.0

Default Gateway

192.168.0.254

Pixel Output and Art-Net configuration parameters are configured with the following default values.

Settings Tab

Parameter

Default Setting

Update Rate

30Hz

Synchronization Mode

None (not used in firmware 3.0+)

Pixel Mapping Mode

RGB 1 Universe

Incoming Universes

1 thru 16 (Art-Net 00:0:0 – 00:0:F)

Note LeDMX4 PRO products consider Art-Net 00:0:0 to be Universe 1 (i.e. offset by 1) so there is an easy mapping between

sACN/E1.31 and Art-Net.

Port Tabs (1-4)

Parameter

Default Setting

Pixel Type

WS2811 – Fast (800kHz)

Pixel Count

170

Null Pixels

Color Order

GRB

Start Universe

1,2,3,4 (Outputs 1,2,3,4 respectively)

Start Channel

Pixel Group Size

ZigZag

Direction

Normal