User Manual
DMXking.com • JPK Systems Limited • New Zealand
0106-700-1.1
1
1. INTRODUCTION
Thanks for purchasing a DMXking.com product. Our aim is to bring you high quality products with great features we know you’ll
appreciate. We ship only what’s required which is why there’s no CD or printed manual in the box, this is part of our commitment
to minimizing environmental impact which also translates into end user savings.
The DMXking.com LeDMX4 PRO is available in 2 versions.
Model
Features
LeDMX4 PRO 5V
Directly drives 5V LED pixel products. Can also provide signal drive for 5-24V LED pixel products where
separate power supplies are used.
LeDMX4 PRO 12V
Directly drives 12V – 24V LED pixel products.
Please check carefully before applying power that you have the correct voltage and polarity!
In many LED pixel installations, especially where the majority of pixels may be running simultaneously at full brightness, it is
necessary to inject DC power at various points along the pixel strip or string. Although the LeDMX4 PRO can only provide up to 5A
per output port terminal block this is not a limitation since currents higher than that will require power injection along the strip
anyhow.
This user manual covers features up to v3.0 firmware. Some functionality may not be available with earlier firmware versions.
MAIN FEATURES
OEM board for integration into your custom LED designs.
DIN rail mount possible with DIN clip accessory.
4 Independent pixel outputs each with 5A supply capability.
1x DMX512 port.
Directly drives WS2811/2812 /TM1809, APA104, APA102, WS2801, LPD880x, LPD6803 and many other compatible LED
strips. Check with DMXking support for specific LED pixel compatibility.
Selectable clock/data rate to suit long cables or fast output.
Up to 340 RGB pixels per output spanning 2 DMX universes (1360 pixels / 8 universes per board).
Automatic RGB order correction and additional pixel re-mapping features.
Null pixel support for longer runs to first active pixel.
Static IP or DHCP network addressing.
Supported operating systems: Any with Ethernet networking support. Windows, MAC OS, Linux, iOS, Android....
Art-Net broadcast, Art-Net II,3 & 4 unicast, sACN/E1.31 Multicast and sACN Unicast support.
Merge 2 incoming Art-Net streams per universe with both HTP and LTP options.
Merge Art-Net/sACN + DMX input -> Pixel universe output.
DMX Input -> Pixel universe output.
sACN Priority takeover for multi-tier controller arrangements
Mix and match ArtNet with sACN merge/priority sources
User configuration of Art-Net Node short and long names
Fully compatible with *ALL* software and hardware that supports Art-Net I, II, 3 & 4 and sACN protocols.
Works with your existing console if Art-Net or sACN external nodes are supported.
Universe Sync Art-Net, sACN and Madrix Post Sync.
Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.
Standalone show playback without computer or network connection.
Configuration utility with basic Art-Net output/input test functionality.
Firmware updates can be performed by end user.