User Manual

DMXking.com • JPK Systems Limited • New Zealand
0106-700-1.1
10
Operation Mode
DMX IN Art-Net, DMX IN sACN, DMX OUT (both Art-Net and sACN are enabled). Fixed IP is
0.0.0.0 by default which equates to OFF. Setting a Fixed IP forces DMX IN unicast to 1 IP only.
DMX Universe
sACN 1-63999 which is translated to an Art-Net Port-Address (Net:Sub:Uni). Setting DMX
Universe = 1 results in sACN Universe = 1 and Art-Net 00:0:0 (Universe 1 = Art-Net Universe
0)
Merge Mode
HTP (Highest Takes Precedence - dimmers), LTP (Last Takes Precedence – moving lights).
Timeout all sources: Last Art-Net or sACN stream source if lost will timeout DMX output.
NOTE: Port A Merge Mode also sets the pixel output merge mode.
Update Rate
DMX512 output frame rate/frequency. Universe Sync takes precedence.
RDM Packet Spacing
Number of 1/20sec intervals enforced minimum between RDM messages on DMX line
RDM Discovery Period (TX) /
sACN Priority (DMX IN mode)
Number of seconds between internally initiated RDM Discovery attempt. Setting Discovery
Period = 0s will disable RDM which is the default. In DMX IN mode – sACN Priority 0 – 200.
Broadcast Threshold
0 = Force Art-Net broadcast mode, > 0 Art-Net II/3/4 unicast.
Recall DMX snapshot at startup
Recall snapshot scene at power on and output until Art-Net or sACN source received.
Snapshot DMX button records current DMX output to snapshot memory.
RECORDER TAB
Please refer to the eDMX PRO Recorder manual for more information. This functionality is common to all eDMX PRO, LeDMX
PRO and ultraDMX2 PRO devices.