User Manual

DMXking.com • JPK Systems Limited • New Zealand

0113-700-1.0

4. CONFIGURATION

DEFAULTS

All ultraDMX2 PRO units ship with default IP address settings and DHCP enabled. Please reconfigure for your requirements

before use.

Parameter

Default Setting

IP Address

192.168.0.112

Subnet Mask

255.255.255.0

Default Gateway

192.168.0.254

DMX512 and Art-Net configuration parameters are also configured with default values.

Parameter

Default Setting

Network Mode

DHCP

*Operation Mode

DMX Out

*Fixed IP

0.0.0.0 [Only for DMX In – Unicast to 1 IP address only]

*DMX Universe

1, 2 [Net 00 : Subnet 0 : Universe 0 & Universe 1]

Note sACN Universe 1 = Art-Net 00:0:0

*Merge Mode/Timeout all sources

HTP, Timeout all sources unchecked

*DMX512 Update Rate

40 [DMX512 frames per second]. Universe Sync will override.

*RDM Packet Spacing

1/20s

*RDM Discovery Period (TX mode)

/ sACN Priority (RX mode)

0s [RDM Disabled]

*Broadcast Threshold

10 [Art-Net II/3/4 unicasting up to 10 nodes]. Set to 0 for Art-Net I

broadcast on DMX IN ports.

*Recall DMX Snapshot at startup

Recall unchecked

Recorder Tab

All options disabled/unchecked by default. TFTP Client IP 0.0.0.0

*These parameters are per port.