User Manual
DMXking.com • JPK Systems Limited • New Zealand
0113-700-1.0
1
1. INTRODUCTION
Thanks for purchasing a DMXking.com product. Our aim is to bring you high quality products with great features we know you’ll
appreciate. We ship only what’s required which is why there’s no CD or printed manual in the box, this is part of our
commitment to minimizing environmental impact which also translates into end user savings.
MAIN FEATURES
Supported operating systems: Any with Ethernet networking support. Windows, OS X, Linux, iOS, Android.
Fully compatible with software suitable for ENTTEC USB DMX Pro. Drivers for Windows, OS X, Linux.
ultraDMX2 PRO - 2x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM support.
DMX512 Out or DMX512 In functionality selectable on each port.
Merge 2 incoming Art-Net/sACN streams per output channel with both HTP and LTP options.
Merge Art-Net/sACN + DMX input -> DMX output.
Merge DMX input + USB DMX source -> DMX output.
USB DMX enhanced mode for 2 Universe Out or 1 In 1 Out.
1500V Isolation between every port.
Art-Net broadcast, Art-Net II, III & 4 unicast, sACN/E1.31 Multicast and sACN Unicast support.
E1.20 RDM over Art-Net support.
Universe Sync Art-Net, sACN and Madrix Post Sync.
User configuration of Art-Net Node short and long names.
Compact tough metal enclosure.
Available with 3 pin or 5 pin XLR sockets.
Accessory port for external show triggering and future add on devices.
Fully compatible with *ALL* software and hardware that supports Art-Net, Art-Net II, III & 4, and sACN protocols.
Fully compatible with lighting consoles capable of generating Art-Net or sACN protocol.
Configuration utility with basic Art-Net output/input test functionality.
Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.
Standalone show playback without computer or network connection.
Firmware updates can be performed by end user.
2. EXTERIOR VIEW
FRONT & REAR VIEW
Two female 3pin or 5pin XLR connectors for DMX512-A input or output function on each port. Port A on left, Port B on right.
Port A indicator at top, Port B indicator at bottom. USB B socket for direct 5V power input and/or connection to host computer
for USB DMX functionality. RJ45 Ethernet socket. RJ12 socket for accessory connection. Upper indicator Protocol/Activity, lower
indicator network link/activity.