User Manual

DMXking.com • JPK Systems Limited • New Zealand
0113-700-1.0
13
9. TECHNICAL SPECIFICATIONS
• Dimensions: 75x36x104mm (WxHxD)
• Weight: 0.27kg
• DMX512 connector: 3 or 5 pin XLR Female per port
• Internal DMX512-A line biasing termination as per ANSI E1.20 RDM requirements.
• 1500V isolation on each port.
• Power input: USB-B socket 5Vdc 400mA.
• Art-Net, Art-Net II, Art-Net III, Art-Net 4 and sACN/E1.31 support.
• ANSI E1.20 RDM compliant with RDM over Art-Net.
• Universe Sync Art-Net, sACN and Madrix Post Sync.
• Both HTP and LTP merging of 2 Art-Net/sACN streams per port
• sACN Priority
• Internal merging capability with DMX In and DMX Out ports on same Universe.
• IPv4 Addressing
• IGMPv2 for multicast network management
• DMX512 Frame Rate: Adjustable per port
10. WARRANTY
DMXKING.COM HARDWARE LIMITED WARRANTY
What is covered
This warranty covers any defects in materials or workmanship with the exceptions stated below.
How long coverage lasts
This warranty runs for one year from the date of shipment from an authorized DMXking.com distributor.
What is not covered
Failure due to operator error or incorrect application of product. Opening the unit voids the warranty.
What DMXking.com will do
DMXking.com will repair or replace, at its sole discretion, the defective hardware. Return shipping costs from our service facility
in New Zealand shall be free of charge.
How to obtain service
Contact DMXking.com directly by email [e-mail]
11. DECLARATIONS (FCC & CE)
FEDERAL COMMUNICATIONS COMMISSION (FCC) DECLARATION OF CONFORMITY
Responsible Party: JPK Systems Limited
PO Box 493