User Manual
DMXking.com • JPK Systems Limited • New Zealand
0107-700-1.0
5
PORT TAB
Make changes to the applicable Port settings then click “Update”.
Parameter
Usage
MAC Address
Factory programmed Ethernet MAC address
IP Address
IPv4 network address
Subnet Mask
Subnet mask, typically 255.0.0.0, 255.255.0.0 or 255.255.255.0 for class A,B & C respectively
Default Gateway
Address of network gateway (router) for communications beyond local subnet
Network Mode
Custom IP, Art-Net 2.x.y.z , Art-Net 10.x.y.z
Operation Mode
DMX In Art-Net, DMX In sACN (multicast only), DMX Out (both Art-Net and sACN
simultaneously)
DMX Universe
sACN 1-63999 which is translated to an Art-Net Port-Address (Net:Sub:Uni). Setting DMX
Universe = 1 results in sACN Universe = 1 and Art-Net 00:0:0 (Universe 1 = Art-Net Universe 0)
Merge Mode
HTP (Highest Takes Precedence - dimmers), LTP (Last Takes Precedence – moving lights).
Timeout all sources: Last Art-Net or sACN stream source if lost will timeout DMX output.
Update Rate
DMX512 output frame rate/frequency
RDM Packet Spacing
Number of 1/20sec intervals enforced minimum between RDM messages on DMX line
RDM Discovery Period (TX) /
sACN Priority (RX mode)
Number of seconds between internally initiated RDM Discovery attempt. Setting Discovery
Period = 0s will disable RDM which is the default. In receive mode – sACN Priority 0 – 200.
Broadcast Threshold
0 = Force Art-Net broadcast mode, > 0 Art-Net II/III unicast.
Recall DMX snapshot at startup
Recall snapshot scene at power on and output until Art-Net or sACN source received.
Snapshot DMX button records current DMX output to snapshot memory.