User manual

DMXking.com • JPK Systems Limited • New Zealand
0091-700-2.1
2
STATUS LED TABLE
LED Indication
Data Protocol activity. Red = RX, Green = TX, Orange = Boot loader mode
Network Network activity. Green = Link, Flash = Traffic
A DMX512 Port A. Green = TX, Red = RX
B DMX512 Port B. Green = TX, Red = RX
3. DEFAULT CONFIGURATION
All eDMX2 units ship with default IP address settings. Please reconfigure for your requirements before use!
Parameter Default Setting
IP Address 192.168.0.112
Subnet Mask 255.255.255.0
Default Gateway 192.168.0.254
DMX512 and Art-Net configuration parameters are also configured with default values. Where noted please do not alter
parameters without first contacting DMXking.com support.
Parameter Default Setting
Network Mode Custom IP address
*Operation Mode DMX Out
*DMX Universe 1-2 [Net 00, Subnet 0, Universe 0-1]
Note sACN Universe 1 = Art-Net 00:0:0
*Merge Mode HTP
*DMX512 Update Rate
40 [DMX512 frames per second]
*RDM Packet Spacing 1/20s
*RDM Discovery Period 0s [RDM Disabled]
*Broadcast Threshold 0 [Force Art-Net broadcast]. Don’t change this unless you want Art-Net
II/III unicast on DMX In ports.
*These parameters are per port.