Product manual

define them as 4, 2, 1, 3 or something likewise annoying.
Head
list
Displays the list of heads currently defined for the fixture.
Add a new head to the fixture, using the Head Editor.
Remove the selected head from the fixture.
Edit the selected head using the Head Editor.
Raise the selected head upwards by one. You can use this to change the order of the
heads within the fixture.
Lower the selected head downwards by one. You can use this to change the order of
the heads within the fixture.
Controls - Physical Tab
Because some fixtures allow their physical properties (e.g. pan/tilt extent) to be altered between
modes, it is beneficial that also the fixture's actual physical properties are tied to fixture modes.
Bulb
Type: The type of the actual light source within the fixture.
Lumens: The light source's total luminous output in lumens.
Colour Temperature (K): The light source's colour temperature in Kelvins
Lens
Name: The type/name of the lens, if applicable.
Min. degrees: The fixture's minimum beam angle in degrees.
Max. degrees: The fixture's maximum beam angle in degrees.
Technical
Power Consumption: The fixture's total power consumption in Watts.
DMX Connector: The type of the fixture's DMX connector.
Dimensions
Weight: The fixture's total weight in Kilograms.
Width: The fixture's total horizontal width in millimeters.
Height: The fixture's total vertical height in millimeters.
Depth: The fixture's total depth in millimeters.
Focus
Type: The method of focusing the beam to a certain point. For stationary
fixtures this can be set to Fixed.
Pan Max Degrees: The maximum pan width in degrees.
Tilt Max Degrees: The maximum tilt height in degrees.
Page 97