Product manual

available only if a fixture provides Intensity channels for RGB/CMY, whose
Colour properties have been set accordingly (see the Colour setting below).
Colour
Only available when the channel has been assigned to the Intensity group.
Tells, whether the channel controls a specific colour out of the primary colours
Red, Green, Blue or Cyan, Magenta, Yellow. If the channel controls the fixture's
master intensity, the Generic colour setting should be used.
Control
Byte
Only available when the channle has been assigned either to the Pan or Tilt
group. If the fixture supports only 8bit movement (only one channel for each),
assign the Coarse MSB control byte to the both of them. If, however, the fixture
supports 16bit movement (two channels for each), you should assign the Coarse
MSB byte to the channels that provide coarse head/mirror movement and the
Fine LSB byte to the channels that provide subtle head/mirror adjustment.
Capability
list
Shows you a list of value ranges for the currently edited channel. If a channel
provides only one capability (for example pan or dimmer) the only thing needed
in the list is one capability with a range of 0 to 255. For more elaborate
capabilities, such as colours or gobos, you should create capability ranges for
each of the colours (for example 0-15 white, 16-32 blue...)
Add a new capability to the channel, using the Capability Editor.
Remove the selected capabilities from the channel.
Edit the selected capability, using the Capability Editor.
Create new capabilities quickly with the Capability Wizard.
Page 93