Product manual

Capability Editor
With the Capability Editor you can define a value range for a certain functionality provided by a
fixture channel. For example, if values 0-15 produce a white colour capability, you might put:
0 to the Min field
15 to the Max field, and
"White" to the Description field
Controls
Min The minimum value of the capability
Max The maximum value of the capability
Description
The name or description of the capability. Don't be too elaborate, just a few
words.
Click & Go capability
The Click & Go functionality for a channel starts from the Capability Editor.
When a channels group is set to Gobo, Colour or Effect, it is possible to assign the color or a
picture that will be displayed by Click & Go on Scene Editor, Simple Desk and Virtual Console
Slider.
This allows a very quick visual feedback, and will avoid you to remember the meaning of each
range of values.
When a channel can support Click & Go, some additional controls will appear on the right side of
the Capability Editor, displaying 3 butons and a preview box. Here's the meaning of each one:
Picture
...
When clicking on this button you can select a picture for this range of values, to be
displayed by Click & Go for visual association and quick access
Colour
When clicking on this button you can select a primary colour for this range of values.
When a primary colour is set, the 'Second colour' button will be enabled. See below.
Second
colour
When clicking on this button you can select a secondary colour for those cases
where a fixture supports it. For example this is quite useful for those moving heads
with colour wheels supporting intermediate positions.
Page 90