Product manual

Click the automatic wizard button to attempt automatic channel detection. You'll receive
further instructions from QLC+. You must have an input plugin assigned to the current universe
for this feature to work. Also, you must first stop the wizard to be able to navigate away from this
dialog page.
Channel properties
When you add or edit a channel, a small window will be displayed, asking you to fill or
change some parameters:
Number: The channel number. Since QLC+ supports a wide variety of input plugins, the
channel number might not be intuitive, so edit this if you know what you're doing.
Name: The channel name. This is an arbitrary string to recognize the meaning of a
channel.
Type: The channel type. This can be: Slider, Knob, Button, Previous
page, Next Page, Set Page
Please note that the page change mapping must be used in conjunction with the Virtual
Console Frame multi-page functionality.
Note that you cannot add the same channel multiple times to one profile.
Back to the input profile definitions panel
When you're done with channels mapping, click the OK button to accept changes and save the
input profile. If you didn't enter a manufacturer/model for the profile, you'll be prompted to enter
them before you can continue.
Now you should see the profile you just defined in the list of available input profiles. Remember
how to assign it to the current universe? Scroll up to Profile assignment if you don't.
To remove any existing input profiles, click the remove button. Note that some profiles are
so-called system profiles and cannot be removed unless you're the administrator.
That's all !
Now you can start using your preferred profile. When assigining an input channel to a QLC+
element (like Virtual Console sliders, channel groups, etc..) you will see that your Input profile
mapping will be used.
Page 78