Product manual

Input Profiles Howto
This howto document tells you how to associate input profiles to input universes and how to edit
these profiles. You should first read the howto on input/output mapping so that you can access
the input/output manager and know how to edit input universes.
Input Profile Manager
To access the Input/Output Manager, just click on the tab with the icon placed on the bottom
of the QLC+ main screen.
Select the desired universe on the left part of the screen and then click the Profile tab places
beside the Mapping tab on the top right part of the screen.
Profile assignment
You will see a list of available input profile definitions, with a check mark on None. This means
that the current universe doesn't have a profile assigned yet. To assign a profile to the universe,
simply place a check mark on one of the available profiles by clicking on the empty check box.
Only one profile can be assigned to one universe at a time, so the check mark will actually move
from its previous position to the item that you have selected.
Add/Edit a Profile
It is probable that your input profile is not on the list and you need to create one of your own.
Click the create new input profile button to start making a profile definition for your
input profile. Alternatively, you can edit any existing profile by selecting the appropriate
item and clicking the edit button. The procedure is exactly the same in both cases
from now on.
Input Profile Editor
A dialog is opened with entry fields for Manufacturer, Model and Type.
Enter the profile's manufacturer, the model and the input type to these fields and then click
the Channels tab to edit the profile's channels.
Now you have two choices for adding channel definitions: Manual and Automatic:
Manual mode
Click the add button to enter individual channel information by hand for each channel.
Click to remove an existing channel
Automatic mode
Page 77