Product manual

Enable
threshold
When selecting a Function or a VC Widget button, this column allows you to set
an activation threshold percentage. When the spectrum or volume bar will go
above this value, the associated function/VC button will be started/activated.
Divisor
For speed dials, this will divide the taps: only every n-th tap will be actually sent
to the speed dial. In other words, the tap happens only every n-th beat. If you want
the tap every beat, enter 1, for every other beat enter 2. For once in a 4/4
measure, enter 4. For once in 3 4/4 measures, enter 12. Maximum is 64.
DMX channels
You can choose one or more channels of the currently patched fixtures. Those channels will be
set proportionally to total volume, or volume in respective frequency band.
Functions
You can select one or more functions. Those functions are started when volume goes above
Enable threshold in respective band, and stopped when it goes below Disable threshold.
VC Widgets
You can select only ONE widget here, either a button, a slider or a speed dial. Depending on the
type:
Button is pressed when volume goes above Enable threshold, and released when the
volume is below Disable threshold (similar to functions).
Slider is moved proportionally to the volume (similar to DMX channels). For slider the
thresholds do not apply.
Speed dial is tapped when the volume goes above Enable threshold, and won't be tapped
again until the volume falls below Disable threshold. That means you probably have to set
the threshold little closer to each other than for buttons.
Note: Controlling widgets works now only if the audio triggers widget was created later than the
controlled widget.
Page 69