Product manual

Value
Range
Low limit: Set the lowest DMX value that the slider can set
High limit: Set the highest DMX value that the slider can set
From capability: You can limit the slider's level value range to a certain
capability range within a fixture's channel. When you have any channel value
range selected from the fixture list (for example "Dimmer Control 006 - 128")
and you click this button, the low and high limit of this slider are taken
automatically from that capability and are set to 6 and 128, respectively.
Fixture
list
You can select individual channels from this list that contains all channels from all
of your fixtures. Those channels that you have placed the tick mark on, will be
controlled by this slider.
All Clicking this button will select ALL channels from ALL fixtures.
None Clicking this button will clear ALL channel selections concerning ALL fixtures.
Invert
Invert the current selection. If you have channels 1, 3 and 5 selected from all
fixtures, clicking this button will de-select channels 1, 3 and 5 and instead select
channels 2, 4 and 6 from those fixtures.
By
group...
If you wish to control a specific channel group from ALL fixtures, you can click this
button and select the channel group to control. Accepting the dialog will select ALL
channels that belong to the selected group from ALL fixtures. This is particularly
useful if you wish to have common control over, for example, all of your scanners'
intensity channels.
Click &
Go
Click & Go is a QLC+ technology which allows you to quick access fixtures
functionalities in a completely visual way. When Click & Go is enabled, a button will
appear at the bottom of the slider and with just 2 clicks you will reach the desired
result.
The supported modes are:
None: Click & Go disabled. No button will be displayed.
Color: Single color selection. A gradient of the color controlled by the slider
will be displayed, allowing you to jump to the desired color visually.
RGB: RGB color selection. A RGB Color picker will be displayed, allowing
you to pick any color from black to white. 16 preset colors are displayed on
the left side for convenience. When selecting a color, the slider value will be
places half way (128). Moving it downward will fade to black, while moving it
upward will tend to white.
Gobo/Effect: Gobo/Macro selection. A grid view of the fixture defined macros
will be displayed and you will be able to choose a macro from its color, its
gobo or its name. When the mouse is over a macro cell, a blue bar will
appear, allowing you to choose also the intermediate value within the same
macro. This is useful for functionalities like Gobo rotation speed.
Configuration - Playback Tab
If the slider is not currently in Playback mode, all you see is a button telling you to click it to
switch to Playback mode. Clicking it will also show the actual Playback mode properties.
When the slider is in playback mode, the slider acts like a combined button and a slider; you start
a function AND simultaneously control the function's intensity with the slider. When the slider is a
Page 56