Product manual

Select Function(s)
Whenever a Function needs to be selected, for example when you're adding steps to a Chaser,
using the Chaser Editor, the Select Function dialog is used.
Sometimes the place you are selecting the function to, might allow selecting multiple functions,
for example, when adding steps to a Chaser or a Collection. In those cases, the order in which
the functions are selected will also be the order in which they are added to their destination.
Oppositely, when attaching a function to a button in the Virtual Console, you may select only one
function at a time.
Refer to your operating system manual for documentation on how to select multiple items in a list.
Controls
Functions
to display
There are two radio buttons on the top of the window: All functions and
Running functions.
By clicking on them, the list below will be filled only with the desired functions.
For example, when performing a Live edit, you might want to display only the
running functions.
Obviously, in design mode, selecting "Running functions" will show an empty
list.
Function
list
Name: The names of available functions
Type: The type of each of the available functions
Filter
You can filter the function list so that only those function types that have been
checked are shown. Filtering is especially useful if you have lots of functions to
select from.
Scenes: Display scene functions in the selection list
Chasers: Display chaser functions in the selection list
EFX's: Display EFX functions in the selection list
Collections: Display collection functions in the selection list
RGB Matrixes: Display RGB Matrix functions in the selection list
Show: Display Show functions in the selection list
Page 45