Product manual

EFX Editor
The EFX editor, as its name suggests, is used to edit EFX functions. The view is split into two
tabs:
General tab is for selecting Fixtures, speed and fixture order.
Movement tab is for selecting details on how the fixtures should move their beams.
General Tab Controls
EFX
name
Change the name of the EFX.
Fixture
list
Step: Shows the order in which the fixtures start their movement in
serial/asymmetric order
Fixture: The name of each fixture that has been added to the EFX
Reverse: When checked, the fixture reverses its movement as opposed to non-
reversed fixtures. The "normal" direction is set by direction in the "Movement"
page.
Start Offset: Value in degrees, where on the movement path this fixture should
start
Intensity: The value set to the fixture's intensity/dimmer channel when the
fixture starts to move
Add a Fixture to the EFX, after the currently selected position. Since EFX is used for
moving the head or mirror of an intelligent fixture, only fixtures with pan and tilt
capability (8bit or 16bit) can be added to an EFX.
Page 34