Product manual

capability provided by that channel.
Hint: The keyboard shortcut to move between channels values edit boxes is 'Tab'
Channel enabled/disabled status
If a channel has not been enabled, the scene will not touch that particular channel's value ever.
If a channel has been enabled, the scene will change that channel's value to a value defined in
the scene. This is useful, for example, when you wish to control only the dimmer channel of a
scanner fixture; you wouldn't want the scene to touch the scanner's pan, tilt, colour or gobo
channels when you just want to fade in or fade out with the dimmer channel.
Controls
Enable all channels from the current fixture.
Disable all channels from the current fixture.
Go to the previous tab in the view. If the first tab is selected, this will go to the last tab in
the view. Keyboard shortcut: 'ALT+Left'
Go to the next tab in the view. If the last tab is selected, this will go to the first tab in the
view. Keyboard shortcut: 'ALT+Right'
The copy functionality has 2 modes:
Copy the values (and enabled/disabled states) of all channels in the current
fixture to the clipboard.
Copy only the selected channels (CTRL-clicked, yellow background) values into
the clipboard.
Paste the values from clipboard to the current fixture. If no channels were selected
during 'copy', then also the enabled/disabled states will be pasted
The 'copy all' functionality has 2 modes:
Copy all values (and enabled/disabled states) of all channels to all other fixtures
taking part in the scene.
Copy only the selected channels (CTRL-clicked, yellow background) values to all
the other fixtures taking part in the scene.
Launch a colour tool to select a specific colour and set that colour to the current fixture;
This feature is enabled only for fixtures that are capable of CMY/RGB colour mixing.
Show/Hide the Speed Dial widget, used to facilitate the Scene parameters tuning like
Fade In and Fade Out
Switch between "tab view" and "all channels view". The first mode will display one tab
for each fixture, while the second will display a unique tab for all the fixtures
Toggle blind mode for the selected fixture.
Page 29