Product manual

Fixture Manager
The fixture manager is the heart of QLC+'s fixture-oriented architecture. As its name already says,
you can manage (add, remove and edit) your lighting fixtures from the fixture manager. On the left
side of the manager there is a list that displays all of the fixtures in the current workspace. When
a fixture is selected, the right side of the window displays the details of the selected fixture. When
a Fixture Group is selected, the right side of the window is occupied by the Fixture Group Editor.
Controls
Add new Fixture(s) to the workspace with the Add/Edit Fixture dialog.
Remove the selected fixtures from the workspace. This also removes the fixtures from
ALL groups they have been assigned to.
Edit the currently selected fixture's properties with the Add/Edit Fixture dialog.
Opens a window to select the desired channels to exclude from fade transitions.
For example, moving head motors shouldn't be affected from Fade In/Fade Out curves.
With this option you can exclude them to obtain the correct behaviour.
When dealing with a lot of fixtures of the same type, you might want to check the "Apply
changes to fixtures of the same type" check box. This can save you quite a lot of time
when setting up your projects for the first time.
Assign the selected fixtures to a Fixture Group displayed in a popup menu. If you have
no groups defined yet, you can choose to create a new one from the menu that opens
when this button is clicked.
Resign (remove) the selected fixtures from the group they are currently in. Note that
removing fixtures from a group will NOT destroy the fixtures completely. Also, removal
from one group will not affect the fixtures' memberships to other groups.
Move the selected Channel Group up
Move the selected Channel Group down
Available from version 4.2.0. Import a fixture list file (.qxfl) into QLC+. Please note that
fixture addresses conflicts are not handled, so it is suggested to use this functionality
on an empty project.
Available from version 4.2.0. Export the list of fixtures currently available on a QLC+
project into a file with extension .qxfl. This file can be used afterward with the import
functionality.
Available from version 4.4.1. Open the Fixtures remapping window.
Page 19