Product manual

Kiosk Mode
QLC+ has a special mode when you need to run the light by inexperienced people, or you just
want to prevent unwanted changes. It's called the Kiosk mode. In this mode, only Virtual Console
is displayed, so no editing is possible.
When you want to start QLC+ in kiosk mode, run:
qlcplus -k -f -o workspace.qxw -p -c 500,10,32,32
-k enables the kiosk mode
-f puts QLC+ in fullscreen mode
-o workspace.qxw opens specified workspace
-p starts operate mode
-c 500,10,32,32 creates a close button with size of 32x32 pixels, 500 pixels from left and 10
pixels from top.
You can of course specify your own workspace file for -o, and size/position for -c.
You can omit any of the paramteres if you need so - for example, omit -c 500,10,32,32 if you don't
want close button, and omit -f if you don't want fullscreen.
All command-line parameters are described here.
Page 108