User manual

DMXking.com • JPK Systems Limited • New Zealand
0077-700-1.3
6
ART-NET NODE NAME
The Art-Net protocol supports device naming which can make larger installations more manageable. Both Short Name (17
characters) and Long Name (63 characters) for an eDMX Device can be modified using the Advanced | Edit Node Name dialog.
FACTORY RESET
This is a last resort option if for whatever reason incorrect or forgotten device network settings have rendered your device
unusable. A word of warning – this function will factory reset *ALL* eDMX devices on your network so it’s critical to separate off
the device requiring reset. We recommend directly connecting a computer and eDMX device using a crossover cable so there’s
no chance of additional eDMX devices accidentally being reset too.
Several warnings are presented before the command is sent.
5. COMPATIBLE SOFTWARE
Art-Net and DMX512 are the most commonly used lighting control protocols with roots in simple theatrical light dimming. These
days almost any lighting or stage effect equipment may be controlled using DMX512 (with explicit exclusion of anything
involving potentially dangerous operations such as pyrotechnics) including moving lights, LED screens, fog machines and laser
displays.
The DMXking.com eDMX1 unit is a single universe Art-Net & sACN device designed for use with computer based show control
software. It replaces an entire lighting console allowing the user to perform sophisticated shows with little more than a laptop.
There are many free and commercial software packages available and by selecting Art-Net as your DMX device compatibility is
guaranteed.
The following tables are by no means a definitive guide to Art-Net & sACN compatible software however it’s a good starting
point.
CONTROLLERS
LightFactory http://www.lifact.com/
Venue Magic http://www.venuemagic.com/
FreeStyler http://www.freestylerdmx.be/