User manual

DMXking.com • JPK Systems Limited • New Zealand
0077-700-1.3
1
1. INTRODUCTION
Thanks for purchasing a DMXking.com product. Our aim is to bring you high quality products with great features we know you’ll
appreciate. We ship only what’s required which is why there’s no CD or printed manual in the box, this is part of our
commitment to minimizing environmental impact which also translates into end user savings.
The DMXking.com eDMX1 product is a robust single universe bi-directional DMX512 interface communicating with the host
computer over Ethernet. The eDMX1 PoE variant also features an Ethercon connector and 802.3af compliant Power over
Ethernet. Support for the widely used Art-Net, E1.20 RDM over Art-Net and sACN E1.31 protocols is included by default.
MAIN FEATURES
− Supported operating systems: Any with Ethernet networking support. Windows, Mac, Linux, iOS, Android.
− DMX512 Out or DMX512 In functionality.
− Art-Net broadcast, Art-Net II & III unicast, sACN/E1.31 Multicast and sACN Unicast support.
− E1.20 RDM over Art-Net support.
− User configuration of Art-Net Node short and long names.
− Tough metal enclosure.
− Available with 3 pin or 5 pin XLR socket, no adapter purchase required.
− External 5Vdc power input USB mini-B socket. Can be powered from computer USB port.
− eDMX1 PoE is 802.3af compliant and uses Ethercon for network connection.
− ANSI E1.11 Higher Protection Level “DMX512-A Protected” device.
− Fully compatible with *ALL* software and hardware that supports Art-Net, Art-Net II & III, and sACN protocols.
− Configuration utility with basic Art-Net output/input test functionality.
− Firmware updates can be performed by end user.
2. EXTERIOR VIEW
FRONT VIEW
One 3pin or 5pin XLR connector for either DMX512-A input or output function. An XLR male to male gender changer may be
required in some DMX512 Input situations depending on your cabling configuration.
REAR VIEW
eDMX1: USB mini-B power socket Ethernet RJ45 socket eDMX1 PoE: Ethercon RJ45 socket