User manual

Installation and User Manual
Press the STYLE UP or STYLE DOWN button to scroll through the list of available
styles and press the * to select a new style. The display will change accordingly.
To change the style for another zone, you must first display the zone information for
the relevant zone, then perform the above steps to change the style. (See Section
4.5, Changing Zones.)
4.4 - Changing Output Volume
To maximize sound fidelity, DMX MUSIC recommends using the volume controls on
your amplification equipment to control playback volume. Volume control can be
accessed via the navigation menu to change the volume of each zone separately.
The change to volume will apply only to the selected zone.
To access the Volume Control menu:
Step 1 From the STA display press the * button to enter the DMM main menu
shown below.
BACK
>Volume Control
Messaging Control
Set Date and Time
Network Control
Schedule Control
Device Information
Step 2 Press the * button to enter the Volume Control Menu.
Step 3 Use the NAVIGATION UP and NAVIGATION DOWN buttons to scroll
through the list of available zones. Highlight the appropriate zone and
press the * button to select.
Page 27 of 48