User manual

Installation and User Manual
Update Incomplete!
Error code: 10
Please try again, or
call for support.
If the DMM displays this or a similar message, please repeat steps 1 and
2. If the DMM continues to display an error, please note the error code
number and call Customer Support (see Appendix C) for assistance.
3.2 – Network and Modem Update
Connectivity to the DMX MUSIC Server is necessary to automatically receive music,
messaging, and configuration updates. After the first successful connection, the
ProFusion X DMM will automatically connect to the DMX MUSIC server for a pre-specified
amount of time at pre-programmed times of day. The ProFusion X DMM does not rely
on connectivity for audio playback but should always be connected via a modem or
network connection.
Occasionally, it may be necessary to perform a manually initiated connection to receive
a specific update or to modify a configuration that may be affecting the
DMM’s performance.
When attempting connections using a modem,
p
lease verify that the telephone line is not in use
before manually initiating a connection from your
DMM.
Step 1 From the STA display press the * button to enter the main DMM menu.
Step 2 Press the NAVIGATION DOWN button until the “Network Control” option is
highlighted.
BACK
Volume Control
Messaging Control
Set Date and Time
>Network Control
Schedule Control
Device Information
Step 3 Press the * button to display the Network Control menu.
Step 4 Press the NAVIGATION DOWN button until the “Start Update” option is
highlighted.
Page 23 of 48