User manual

Installation and User Manual
Use the NAVIGATION UP and DOWN buttons to change the Outside Line
Number, and press the * button to select.
Once the Outside Line configuration has been set, a Test Connection is
recommended. Please refer to Section 2.4.2, Test Net Connection for
instructions.
2.3.5 – Setting the Dialing Type (Modem Connection Only)
Telephone lines use different methods for dialing. Some use pulse dialing, while
most use tone dialing. Follow the steps below to configure the dialing type for the
DMM. If you do not know what type of dialing your phone line uses, please contact
your telephone service provider. These steps apply to DMMs in North America
only.
Step 1 From the Set Configuration menu press the NAVIGATION DOWN button
until the “Set Dialing Type” option is highlighted.
Step 2 Press the * button to enter the Set Dialing Type screen:
Dialing Type:
>Tone
Pulse
Current Type: TONE
Step 3 Use the NAVIGATION UP and DOWN to change the Dialing Type setting,
and press the * button to select. Once the Dialing Type has been
configured, a Test Connection is recommended. Please refer to Section
2.4.2, Test Net Connection for instructions.
2.3.6 – Setting the Call Waiting Disable Code (Modem Connection Only)
If the telephone line connected to the ProFusion X DMM utilizes a “call-waiting”
feature, please follow the steps below. If you do not know the necessary code to
disable call waiting on your phone line, please contact your local telephone service
provider. These steps apply to DMMs in North America only.
Step 1 From the Set Configuration menu press the NAVIGATION DOWN button
until the “Set Call Waiting” option is highlighted.
Step 2 Press the * button to enter the Set Call Waiting screen:
Call Waiting:
>No
Yes
Current Setting: YES
Page 16 of 48