User manual

Installation and User Manual
1212”), which is commonly used for long distance dialing. These profiles apply to
DMMs in North America only.
Step 1 From the Set Configuration menu press the NAVIGATION DOWN button
until the “Set Dialing Profile” menu is highlighted.
Step 2 Press the * button to enter the Set Dialing Profile screen:
Dialing Profile:
>A) ###-####
B) (###)###-####
C) 1(###)###-####
Current Profile: A
Step 3 Use the NAVIGATION UP and DOWN to change the Dialing Profile setting,
and press the * button to select. Once the dialing profile has been set, a
Test Connection is recommended. Please refer to Section 2.4.2, Test Net
Connection for instructions.
2.3.4 – Setting the Outside Line (Modem Connection Only)
If the DMM is using an internal analog telephone line, follow the instructions below to
configure it to dial the necessary number to access an outside line. These steps
apply to DMMs in North America only.
Step 1 From the Set Configuration menu press the NAVIGATION DOWN button
until the “Set Outside Line” option is highlighted.
Step 2 Press the * button to enter the Set Outside Line screen:
Outside Line:
>No
Yes
Current Setting: YES
Step 3 Use the NAVIGATION UP and DOWN to change the Outside Line setting to
the appropriate configuration. Press the * button to select. If you have
selected “YES”, continue to step 4.
Step 4 The DMM will display the Select Line Number screen:
Outside Line:
9
Hit * to select
Page 15 of 48