Installation manual

3. Hook the audio/video patch cord up to connection labeled “audio/video cable connection” on the above
diagram of the rear panel of ProFusion. Another cable, supplied with the rest of your sound system or
by an install technician, will be used to connect the audio and video output jacks to the audio and video
inputs in your system.
4. If your music service agreement entails content updates via the internet, you may hook a telephone line
up from the RJ11 “telephone line” connection (see above) to the proper telephone jack located in your
store. If you are unsure of what telephone line you are able to use in your store, please contact your
corporate office.
5. If your music service agreement states that you will be receiving content updates via your corporate
intranet, connect a Cat5 network cable from the RJ45 “network connector” on the digital server to the
proper input on the network hub in your store. If you are unsure of what network input to use, please
contact your corporate office.
6. You are now ready to turn your ProFusion on and begin listening to music. Simply press the power
button in (locate the power button on the above diagram of the front panel) until the display lights up.
The machine will begin an initializing process which will last 2-3 minutes. The green and red lights on
the front panel of the machine will light as it begins its initializing process. Following this initializing,
music and/or videos will begin to play.
7. If you experience any difficulty in setting up ProFusion, please contact DMX MUSIC Customer Care
at 1-800-345-5000.
If you experience any difficulty with your digital server,
please contact DMX MUSIC Customer Care at 1-800-345-5000
5